What you need to know about doing your own home inspections

Whether you’re a buyer or a seller, home inspections are a big part of creating a reasonable cost for a property. Knowing the real condition of home lets you determine its real worth, and the likely cost of repairs necessary to return the home to its best condition. Typically, a professional certified inspector does the complete home inspection, but it’s quite possible to get a general idea about the condition of a home by doing the inspection yourself.

Results may vary based on the complexity of the problems assessed during the inspection, but attention to knowledge and detail as to what you should look for can give you a clearer idea as to the condition of the home.

home inspections

Here’s what you need to know about doing your own home inspections :

Create a checklist. Create and print out an inspection checklist encompassing all the areas you need to examine. As you accomplish your home inspection one by one, check each item off your list. Leave spaces under each item for notes as to the condition of the items checked off.

Assess from the curbside viewpoint. Choose a viewing angle that will give you an overall look at the home’s structure. Walk around the home, viewing it from different sides, scrutinising the angles of doors, windows, porches and the roof. All of these should be straight, solid and level. Any presence of bowed lines or sagging structural add-ons can serve as a pointer of damage to the structure of the home.

Check the exterior closely. Move closer to the property and look for any wear and tear on the exterior. See if you can find any water-damaged areas shown by discoloration, decaying wood or darkened paint in water gathering areas like ledges or doorjambs, and along the drainage line of the roof. See if the siding on the home runs straight and level, without any swells or slackness. Inspect brick walls for absent or damaged bricks and any detaching mortar between the bricks in place. Observe the foundation as well, looking for cracks or sagging.

Check the interior exhaustively. Check the rooms of the home. Inspect the lines of the ceilings and walls for any gaps or crookedness that may indicate inferior building or restoration work. Look at the angles of the ceilings and floors. A visible slant can indicate a deteriorating foundation. Look carefully at walls and ceilings for any discoloration that can transpire from water damage. Touch these areas to feel for softness in the walls that may indicate decay. Check all railings and bannisters to make sure they’re robust. Lastly, check interior doors for good operation.

Check the plumbing for signs of corrosion or dripping water. Next check the age and condition of appliances in the home, especially the stove, refrigerator, and dishwater. Test the home’s entire wiring system thoroughly as well.

Have you already considered your home loan provider or the type of mortgage you’re going to take? Consider variable rates. Premium variable rate home loans can offer the following benefits:

  • Split your loan with other Newcastle Permanent loans
  • Everyday Account with 100% offset available
  • Borrow up to 95% of the property value
  • Make additional repayments and redraws at any time
  • Competitive variable interest rate
  • No establishment fees
  • No ongoing fees

End Note

That’s the summary of a DIY home inspection. Regardless, A DIY home inspection won’t take the place of an expert and qualified home inspection. When buying a home, strongly consider getting a professional inspector to check the home before closing the deal.

 

You might also like More from author

Comments are closed, but trackbacks and pingbacks are open.